LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
Made in the U.S.A., Kut Gard® seamless knit gloves and sleeves are designed to provide the highest possible cut protection for the food industry. Because they comply with both the US and Canadian standards for food contact, Kut Gard® gloves and sleeves blended with antimicrobial fibers can be used for operations where direct, indirect, and incidental contact with food may occur.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: PVC
Durable resistance and barrier protection against petrochemicals, oils and grease. While it is flexible, PVC does not provide the tactile sensitivity associated with most rubber products.
GRIP: DOT
Patterns such as dots, blocks and palm coatings in a variety of polymers provide an enhanced grip, performance and durability. String knit/ambidextrous gloves can have a pattern screened on both sides to extend the life of the glove.
COATING: PVC
Durable resistance and barrier protection against petrochemicals, oils and grease. While it is flexible, PVC does not provide the tactile sensitivity associated with most rubber products.
GRIP: DOT
Patterns such as dots, blocks and palm coatings in a variety of polymers provide an enhanced grip, performance and durability. String knit/ambidextrous gloves can have a pattern screened on both sides to extend the life of the glove.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: PVC
Durable resistance and barrier protection against petrochemicals, oils and grease. While it is flexible, PVC does not provide the tactile sensitivity associated with most rubber products.
GRIP: TIGER PAW
Patterns such as dots, blocks and palm coatings in a variety of polymers provide an enhanced grip, performance and durability. String knit/ambidextrous gloves can have a pattern screened on both sides to extend the life of the glove.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
GRIP: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
From athletes to astronauts, first responders to industrial workers, Kevlar® enables anyone, with an imagination and a job to do, to Dare Bigger™. PIP, the leading provider of coated seamless knit gloves in America teamed up with DuPont® to develop the new G-TEK® KEV™ series of cut resistant gloves, a unique combination of high strength and thermal stability.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: CRINKLE
Latex crinkle coatings are designed to channel away liquids to allow a better handling in heavy duty wet and dirty conditions. The thicker coating provides additional protection for cut and puncture applications.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: MICROFINIS
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: FOAM
Available in Nitrile, Latex and PVC, foam grip is designed to channel away liquids to allow better handling in wet and dirty conditions. Also provides excellent grip and tactile sensitivity in dry applications.
LINER MATERIAL: KEVLAR
DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
https://us.pipglobal.com/en/products/?scID=2560&ccID=11570&sID=28303&ssID=80213&pID=16134
The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: PVC
Durable resistance and barrier protection against petrochemicals, oils and grease. While it is flexible, PVC does not provide the tactile sensitivity associated with most rubber products.
GRIP: DOT
Patterns such as dots, blocks and palm coatings in a variety of polymers provide an enhanced grip, performance and durability. String knit/ambidextrous gloves can have a pattern screened on both sides to extend the life of the glove.
LINER MATERIAL: SUPRENE
Advancements in nanofabrication have resulted in the development of Suprene™ - based on graphene, it is a new fiber that is proving to be amongst the highest in resistance to cut and tear. Similar to graphite, graphene is remarkably strong for its weight — being 100 times stronger than steel - it outperforms any other material. Structurally it is very different than other fibers in that it is made up of micro-structured graphene sheets well-aligned along the fiber axis.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
The latest breakthrough in nanofabrication has resulted in Suprene™
– an affordable fiber with unparalleled strength and physical properties.
LINER MATERIAL: SUPRENE
Advancements in nanofabrication have resulted in the development of Suprene™ - based on graphene, it is a new fiber that is proving to be amongst the highest in resistance to cut and tear. Similar to graphite, graphene is remarkably strong for its weight — being 100 times stronger than steel - it outperforms any other material. Structurally it is very different than other fibers in that it is made up of micro-structured graphene sheets well-aligned along the fiber axis.
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: SUPRENE
Advancements in nanofabrication have resulted in the development of Suprene™ - based on graphene, it is a new fiber that is proving to be amongst the highest in resistance to cut and tear. Similar to graphite, graphene is remarkably strong for its weight — being 100 times stronger than steel - it outperforms any other material. Structurally it is very different than other fibers in that it is made up of micro-structured graphene sheets well-aligned along the fiber axis.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards, and test scores are readily available on each product’s webpage.
LINER MATERIAL: POLYKOR X7
X7™ Technology represents the latest in engineered yarn development. This super light-weight and thin, 18 gauge reinforced yarn provides very high cut resistance and durability by way of proprietary fibers. The result is exceptional cut resistance in a thin liner configuration.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
GRIP: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: FOAM
Available in Nitrile, Latex and PVC, foam grip is designed to channel away liquids to allow better handling in wet and dirty conditions. Also provides excellent grip and tactile sensitivity in dry applications.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
LINER MATERIAL: POLYKOR X7
X7™ Technology represents the latest in engineered yarn development. This super light-weight and thin, 18 gauge reinforced yarn provides very high cut resistance and durability by way of proprietary fibers. The result is exceptional cut resistance in a thin liner configuration.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: PVC
Durable resistance and barrier protection against petrochemicals, oils and grease. While it is flexible, PVC does not provide the tactile sensitivity associated with most rubber products.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: CRINKLE
Latex crinkle coatings are designed to channel away liquids to allow a better handling in heavy duty wet and dirty conditions. The thicker coating provides additional protection for cut and puncture applications.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
LINER MATERIAL: POLYKOR XRYSTAL
G-Tek® PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. PolyKor™ fiber is combined with naturally hardened crystallized minerals, resulting in a super tough, durable, cut resistant fiber that is at the peak of performance.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
LINER MATERIAL: POLYKOR XRYSTAL
G-Tek® PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. PolyKor™ fiber is combined with naturally hardened crystallized minerals, resulting in a super tough, durable, cut resistant fiber that is at the peak of performance.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: FOAM
Available in Nitrile, Latex and PVC, foam grip is designed to channel away liquids to allow better handling in wet and dirty conditions. Also provides excellent grip and tactile sensitivity in dry applications.
https://us.pipglobal.com/en/products/?scID=2560&ccID=11570&sID=28293&ssID=80185&pID=82600
PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. It is a blend of high-modulus polyethylene and mineral-based fibers. These mineral-based fibers have a similar chemical composition to glass, but are inherently better in terms of strength, heat and oxidation resistance as well as compression and shear.
LINER MATERIAL: POLYKOR XRYSTAL
G-Tek® PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. PolyKor™ fiber is combined with naturally hardened crystallized minerals, resulting in a super tough, durable, cut resistant fiber that is at the peak of performance.
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: POLYKOR XRYSTAL
G-Tek® PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. PolyKor™ fiber is combined with naturally hardened crystallized minerals, resulting in a super tough, durable, cut resistant fiber that is at the peak of performance.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
LINER MATERIAL: POLYKOR XRYSTAL
G-Tek® PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. PolyKor™ fiber is combined with naturally hardened crystallized minerals, resulting in a super tough, durable, cut resistant fiber that is at the peak of performance.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
GRIP: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
LINER MATERIAL: DYNEEMA
Dyneema® is 15 times stronger than steel on a weight for weight basis! It's a High Performance Polyethylene (HPPE) fiber made from Ultra-High Molecular Weight Polyethylene (UHMWPE). Dyneema® fiber is much thinner and more flexible than traditional materials, such as leather and cotton, while offering higher protection.
LINER MATERIAL: POLYKOR XRYSTAL
G-Tek® PolyKor™ Xrystal™ is an engineered yarn that represents the next generation in maximum cut protection and comfort. PolyKor™ fiber is combined with naturally hardened crystallized minerals, resulting in a super tough, durable, cut resistant fiber that is at the peak of performance.
HIDE: SPLIT COWHIDE
Split cowhide leather provides comfort, durability, excellent abrasion resistance, and breathability. Split leather is economical and has a visible texture.
CUFF: SAFETY
Safety cuff helps protect wrist, allows for fast removal, and adds water resistance.
HIDE: TOP GRAIN COWHIDE
Cowhide leather construction provides comfort, durability, excellent abrasion resistance and breathability.
LINER MATERIAL: COTTON / JERSEY
Cotton is a natural fiber that offers comfort at a low price point. Cotton jersey construction keeps hands cool and protected.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: POLYESTER
Polyester is a synthetic fiber that offers good abrasion resistance and an amount of chemical resistance.
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
LINER MATERIAL: NYLON
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: CRINKLE
Latex crinkle coatings are designed to channel away liquids to allow a better handling in heavy duty wet and dirty conditions. The thicker coating provides additional protection for cut and puncture applications.
COATING: LATEX
Offers good dry and wet (aqueous-based liquids, animal fats, caustics, acids and alcohols) grip as well as resistance to snag, cut, puncture and abrasion.
GRIP: CRINKLE
Latex crinkle coatings are designed to channel away liquids to allow a better handling in heavy duty wet and dirty conditions. The thicker coating provides additional protection for cut and puncture applications.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: POLYESTER
Polyester is a synthetic fiber that offers good abrasion resistance and an amount of chemical resistance.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: NYLON
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: DOT
Patterns such as dots, blocks and palm coatings in a variety of polymers provide an enhanced grip, performance and durability. String knit/ambidextrous gloves can have a pattern screened on both sides to extend the life of the glove.
LINER MATERIAL: NYLON
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: FOAM
Available in Nitrile, Latex and PVC, foam grip is designed to channel away liquids to allow better handling in wet and dirty conditions. Also provides excellent grip and tactile sensitivity in dry applications.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: FOAM
Available in Nitrile, Latex and PVC, foam grip is designed to channel away liquids to allow better handling in wet and dirty conditions. Also provides excellent grip and tactile sensitivity in dry applications.
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.
GRIP: FOAM
Available in Nitrile, Latex and PVC, foam grip is designed to channel away liquids to allow better handling in wet and dirty conditions. Also provides excellent grip and tactile sensitivity in dry applications.
LINER MATERIAL: NYLON
COATING: NEOFOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability. acids.
GRIP: FOAM
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability. acids.
COATING: NITRILE
Excellent dry grip, thicker coating offers superior resistance to snag, cut, puncture and abrasion. When enhanced by a foam coating, it offers very good grip in chemicals including oils, petrochemicals, fuels and most acids.
GRIP: MICROSURFACE
Created by using a soft and flexible compound such as latex or nitrile filled with thousands of tiny suction cups. As these suction cups come into contact with a surface, they create a vacuum that disperses fluids away from the object to allow clean contact with the object. Works well in handling wet and dirty applications.
LINER MATERIAL: POLYESTER
Polyester is a synthetic fiber that offers good abrasion resistance and an amount of chemical resistance.
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: NYLON
COATING: POLYURETHANE
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: POLYKOR
Products constructed with PolyKor™engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.
COATING: NEOFOAM
Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.
GRIP: SMOOTH
Available in a variety of polymers such as latex, nitrile, PVC, Neoprene and Polyurethane. Smooth coatings provide the wearer an excellent dry grip. Liquids will not absorb into the coating which will keep the hands dry.
LINER MATERIAL: SUPRENE
Advancements in nanofabrication have resulted in the development of Suprene™ - based on graphene, it is a new fiber that is proving to be amongst the highest in resistance to cut and tear. Similar to graphite, graphene is remarkably strong for its weight — being 100 times stronger than steel - it outperforms any other material. Structurally it is very different than other fibers in that it is made up of micro-structured graphene sheets well-aligned along the fiber axis.
COATING: NITRILE
Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability. acids.
LENS: TINTED
Tinted lenses relieve eyes from bright light and glare. Different colors serve specific conditions and applications.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: MIRROR PLUS
A mirror coating on the face of the lens will deflect sunlight from the wearer’s eyes, delivering noticeably less glare and reflection than standard gray lenses. Anti-ReflectivePLUS™ coating on the back of the lens significantly reduces light reflecting back into the eye for enhanced comfort and performance.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-REFLECTIVE
Anti-Reflective (AR) lens coating will improve visual acuity in any application by reducing reflections and improving visible light transmission.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-REFLECTIVE
Anti-Reflective (AR) lens coating will improve visual acuity in any application by reducing reflections and improving visible light transmission.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: INDOOR OUTDOOR BLUE
Overexposure to blue light, including smart phones, tablets and computer screens, has been known to cause eyestrain, fatigue and possibly contribute to long term macular degeneration. I/O Blue lenses are uniquely coated to help filter out harsh blue light and improve worker comfort and visual acuity. Lenses are also treated with a contrast booster to enhance color contrast.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: GRADIENT
High-powered overhead lights, such as fluorescent and mercury lighting, can cause glare that increases eye strain. Gradient lenses feature a slight mirror coating on the top portion of the lens, reducing glare, while the remainder of the lens remains clear. As a result, workers are still able to see clearly when looking straight ahead or down at their work.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: ROUND FACE
Designed to better fit larger and rounder faces, with elements such as flexible temples and a larger frame size.
LENS: TINTED
Tinted lenses relieve eyes from bright light and glare. Different colors serve specific conditions and applications.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: ROUND FACE
Designed to better fit larger and rounder faces, with elements such as flexible temples and a larger frame size.
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: IR FILTER
IR lenses protect your eyes from UV rays and flash burns, while also offering a high level of impact-protection from flying objects associated with cutting, brazing and torch soldering. These safety glasses for welding DO NOT have the same level of protection as a helmet and should NOT be worn instead of a welding mask when arc welding.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: POLARIZED
Reflected sunlight from smooth surfaces, such as water, pavement, and snow can dangerously hinder vision and cause significant eyestrain. PolarizedXL5™ lenses filter the scatter light by controlling the angle at which it enters the lens. The result is clearer vision of the surrounding area and greatly reducing eye glare.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
LENS COATING: ANTI-FOG
Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: UNCOATED
Economical style intended to be used by visitors to a facility, or other short-term applications.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: TINTED
Tinted lenses relieve eyes from bright light and glare. Different colors serve specific conditions and applications.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: POLARIZED
Reflected sunlight from smooth surfaces, such as water, pavement, and snow can dangerously hinder vision and cause significant eyestrain. PolarizedXL5™ lenses filter the scatter light by controlling the angle at which it enters the lens. The result is clearer vision of the surrounding area and greatly reducing eye glare.
LENS COATING: ANTI-SCRATCH
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: TINTED
Tinted lenses relieve eyes from bright light and glare. Different colors serve specific conditions and applications.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: POLARIZED
Reflected sunlight from smooth surfaces, such as water, pavement, and snow can dangerously hinder vision and cause significant eyestrain. PolarizedXL5™ lenses filter the scatter light by controlling the angle at which it enters the lens. The result is clearer vision of the surrounding area and greatly reducing eye glare.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: MIRROR PLUS
A mirror coating on the face of the lens will deflect sunlight from the wearer’s eyes, delivering noticeably less glare and reflection than standard gray lenses. Anti-ReflectivePLUS™ coating on the back of the lens significantly reduces light reflecting back into the eye for enhanced comfort and performance.
LENS COATING: ANTI-SCRATCH, ANTI-REFLECTIVE
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Reflective (AR) lens coating will improve visual acuity in any application by reducing reflections and improving visible light transmission.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: IR FILTER
IR lenses protect your eyes from UV rays and flash burns, while also offering a high level of impact-protection from flying objects associated with cutting, brazing and torch soldering. These safety glasses for welding DO NOT have the same level of protection as a helmet and should NOT be worn instead of a welding mask when arc welding.
LENS COATING: ANTI-SCRATCH, ANTI-REFLECTIVE
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Reflective (AR) lens coating will improve visual acuity in any application by reducing reflections and improving visible light transmission.
FRAME FIT:UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: TINTED
Tinted lenses relieve eyes from bright light and glare. Different colors serve specific conditions and applications.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: ROUND FACE
Designed to better fit larger and rounder faces, with elements such as flexible temples and a larger frame size.
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: ROUND FACE
Designed to better fit larger and rounder faces, with elements such as flexible temples and a larger frame size.
LENS: GRADIENT
High-powered overhead lights, such as fluorescent and mercury lighting, can cause glare that increases eye strain. Gradient lenses feature a slight mirror coating on the top portion of the lens, reducing glare, while the remainder of the lens remains clear. As a result, workers are still able to see clearly when looking straight ahead or down at their work.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: INDOOR OUTDOOR BLUE
Overexposure to blue light, including smart phones, tablets and computer screens, has been known to cause eyestrain, fatigue and possibly contribute to long term macular degeneration. I/O Blue lenses are uniquely coated to help filter out harsh blue light and improve worker comfort and visual acuity. Lenses are also treated with a contrast booster to enhance color contrast.
LENS COATING: ANTI-SCRATCH, ANTI-FOG
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Fog is a surface coating that reduces fogging, maintaining clear vision. Ideal for food plants or cleaning operations with high-humidity environments.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..
LENS: CLEAR
For general use. No color distortion, all polycarbonate has 99.9% UV absorption.
LENS COATING: ANTI-SCRATCH, ANTI-REFLECTIVE
Anti-Scratch is a hardcoat treatment that toughens lens surface for a longer product life with fewer scratches. Anti-Reflective (AR) lens coating will improve visual acuity in any application by reducing reflections and improving visible light transmission.
FRAME FIT: UNIVERSAL
Designed to adapt to the average face size, including styles with adjustable elements to create a custom fit..